Place the motorcycle on the paddock stand or centre stand and put the gearbox in neutral to allow the rear wheel to rotate freely.
When using the chain cleaning spray, turn the back wheel in a clockwise direction.
Make sure to cover the ground with thick sheets of paper at the same time to stop any cleaning solution from spilling on the floor.
Now go over every chain wall with the cleaning brush to make sure nothing is left unfinished.
After carefully cleaning the chain, use the cloth to blot up any cleaning solution that may have leaked from the chain set.
After letting the chain dry for at least one hour, carefully cover all of the chain surfaces with the chain lubrication spray.
Do not ride the bike until the chain has had time to absorb the lubrication spray, which should take at least 60 minutes.
Additionally, avoid washing the cars shortly after using the lubricant spray because that could also remove it.
Make sure you avoid overapplying the lube spray because doing so could cause lube to spill out into the floor and leave behind difficult-to-remove black areas.